OSM Accessories
OSM Recloser & RC10 Control Communication Cubicle Accessories
OSM Recloser & RC10 Control Communication Cubicle Accessories
The OSM recloser is supplied with an RC10 Control Cubicle. NOJA Power can provide a number of accessories including:
This cable provides a USB to RS232 port complete with a male DB9 connector.
The MOD-0003 is an industrial GSM modem to provide fast, reliable connection for RC10 communications requirements.
The Ethernet to Fibre Modem is designed to convert Ethernet networks to fibre networks by transparently converting Ethernet signals to optic signals.
The Serial to Fibre Modem RC10 accessory is designed to convert Serial data to optic signals. Easy to install, offers a high speed electrically isolated communication over a long distance.
The RS485 isolator is used with the RS485 cable to provide up to 3.5kV of opto-isolation for incoming cables.
The Dual Remote HMI Unit is suitable for 19 inch rack mounting and houses two Human Machine Interfaces (HMI) designed for safe and easy operation.
The surge protector is used to protect the Ethernet port from surges up to 5kA for incoming cables.
This adaptor is used to provide 802.11b/g wireless Ethernet connections to the RC10 cubicle.
The WiFi Router is used with the Ethernet to Wireless adaptor to provide an outdoor wireless access point for connection to the RC10 cubicle. It has a weather proof housing and can be used with an external antenna if required.
Up to two Input Output (IO) modules can be supplied with the RC cubicle as an option. Each I/O module has eight opto–coupled inputs and eight voltage free contact outputs with normally open and normally closed contacts.
The NOJA Power Distribution System Automation (DSA) Simulator demonstrates RC10 grid automation functionality.
The RC10 Rack Mounted Test Set has been custom designed to assist engineers with bench testing of reclosers in protection and SCADA systems.
An optional RC10 OSM simulator is available for testing purposes where an actual OSM recloser is unavailable.
The interface test set provides an interface for secondary injection from Power System Simulators.
The RC10 Demo Unit is used primarily for training and demonstration purposes. It can also be used to test SCADA connections using RS232, USB and Ethernet ports. The unit includes a Panel and Relay mounted in a sturdy case. Supplied complete with power adaptor suitable for 110/220V AC input.
OMB-17 and OMB-18 Combined Pole Mounting Brackets are used to mount both the VT and OSM15, OSM27 or OSM38 reclosers to both wooden and concrete poles. It is constructed out of structural grade steel with a hot-dip galvanized finish.
Pole mounted outdoor voltage transformer complete with mounting bracket and accessories. These VTs are designed to supply our control cubicle with LVsupply where a local LV supply is unavailable.
These Single phase VTs are designed to supply our control cubicle with LV supply where a local LV supply is unavailable.
Two hole cable palms with NEMA spacing. The cable palms are supplied with two (2) M12x25mm stainless steel bolts together with flat and spring washers.
Custom designed and manufactured BGD-06, BGD-03 and BGD-02 PVC Bird Guards.
The Substation Mounting Frame is designed to fit all OSM reclosers and control cubicles. It is used in conjunction with OMB-18 Pole mounting Bracket.
© 2002-2019 NOJA Power Switchgear Pty Ltd | Terms of Use | Privacy Policy | Glossary | Site Map
